Replacement cartridge will fit any 20-inch big blue filter housing
Greatly reduces the taste and smell of chlorine
Filters out organic materials and sediments
Enclosed in a 5-micron filter membrane
Replace once every 12 months (depending on the quality of water supply)
Activated carbon is treated or activated with oxygen to give it tiny holes and make it absorbent like a sponge. This solid block of porous carbon creates a chemical reaction when water passes through which absorbs chlorine and other organic materials. There is a 5-micron membrane surrounding the activated carbon block filter to trap any particles that may detach during the water filtration process. Dimensions:11.4cm x 50.8cm
Important: Installation & Flushing
- Isolate water and power (where fitted), then release pressure before servicing.
- Check serviceable housings, including pre-assembled units, and remove shipping wrap. Keep permanent mesh, end caps and seals intact; do not dismantle sealed cartridges. Refit correctly and check for leaks.
- New carbon releases dust that can block taps, aerators, strainers, downstream filters and other equipment.
- At first use and after carbon replacement, route flushing water directly to a bucket or open drain, bypassing downstream equipment via the manufacturer's approved flushing connection.
- Flush until clear, for at least the manufacturer's specified time or volume. Do not drink the flushing water; stop and contact H2O Warehouse if particles persist.
- Where an RO membrane is fitted downstream, protect it using the model's separate-prefilter or assembled-system flushing procedure. Do not improvise bypasses or run pumps dry; complete membrane and system start-up flushing.
- Clear water is not proof of drinking-water safety; follow all feed-water, disinfection and commissioning requirements.