The BADU C1 cleans the floor, walls and waterline of inground and above-ground pools up to 150 m². Its cordless, rechargeable design works independently of a cleaner hose, with three motors, dual PVC brushes and smart S-path navigation to collect sand, silt and leaves. Suitable pool finishes include PVC, gunite and fibreglass.
Cleaning functions and smart control
-
Five cleaning modes: floor, wall, wall-then-floor, full pool and eco floor.
-
Six preset cleaning paths: three floor patterns and three wall patterns to suit different pool shapes and sizes.
-
IMU navigation sensors: support planned cleaning routes, with the ability to cross obstacles and climb slopes and steps.
-
WYBOT app: select modes and paths, set the cycle timer, and check battery and filter status. Bluetooth and Wi-Fi connectivity and over-the-air software updates are supported.
-
Cycle scheduling: schedule up to four cleaning cycles across seven days. Timer options include one 120-minute run or four 30-minute floor cycles.
-
Self-parking: at the end of a cycle, or when the battery runs low, the cleaner parks at the pool wall for retrieval with the supplied hook.
Filtration and routine care
A 180 µm fine-filtration basket collects debris inside the cleaner. The top-loading basket lifts out for rinsing without tools or filter bags. Capturing debris in the cleaner helps reduce the load on the pool's main filtration system.
Technical specifications
-
Maximum cleaning surface area: 120–150 m².
-
Pool depth: minimum 0.5 m; maximum 3 m.
-
Pool types: inground and above-ground; PVC, gunite and fibreglass linings.
-
Motors / brushes: 3 motors / 2 brushes.
-
Navigation sensor: IMU.
-
Battery: 4600 mAh lithium-ion.
-
Run time: Up to 2–2.5 hours. Actual run time may vary.
-
Power: 65 W.
-
Suction flow rate: 11.5 m³/h.
-
Running speed: 16 m/min.
-
Filtration: 180 µm basket.
-
Charging time: 3 hours.
-
Charging type: DC charger cable.
-
Charger input: 100–240 V, 50–60 Hz.
-
Charger output: 25.2 V / 1.78 A.
-
Water resistance: IPX8.
-
Net unit weight: 8 kg.
-
Unit dimensions (L × W × H): 36 × 39 × 26 cm.
-
Packed dimensions (L × W × H): 46.1 × 43.6 × 32.7 cm.
Use and charging
The rechargeable battery provides cordless pool cleaning, with a stated three-hour charging time using a DC charger cable. Choose a cleaning mode and path to suit the pool, and use the cycle timer for scheduled cleaning. The cleaner returns to the pool wall when its cycle ends or the battery runs low. The net unit weight above excludes packaging.
Warranty
24-month ex-factory warranty under normal operating conditions from the date of purchase.
Product guide
Download the BADU C1 & S2 product guide (PDF)